Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Trusted Metal Roofing for Summerlin Homeowners
If your Summerlin roof is taking a beating from the afternoon sun and the monsoon gusts that roll off the Spring Mountains, metal is worth a serious look. A metal roof here can last decades longer than asphalt, reflect a good chunk of the desert heat, and hold up to the wind that peels shingles off ridges in the western neighborhoods. Our technicians have up to 30 years of experience, and we install panels from names like GAF and Boral. We’re locally owned and owner-operated, every job is backed by our written 90-Day Done Right Promise, and a live person answers the phone 24/7 at (844) 951-4545. We’re licensed, insured, and we don’t hide behind a call center.

What Our Metal Roofing Service Includes
Metal roofing covers a wide range of products, and the right one depends on your home, your budget, and how the roof is built. Here’s what we handle in Summerlin.
Standing Seam Metal Roof
A standing seam roof uses long panels with raised interlocking seams that run up the slope, so there are no fasteners showing on the flat surface. It’s the cleanest-looking option and one of the most weather-tight, which matters when wind-driven rain hits a low-slope section. Homeowners often choose it when they want a modern look and the longest service life we can offer. We measure every panel on site, set the clips to the correct spacing, and show you the deck photos before we talk money.
Metal Shingle Roofing
Metal shingles are stamped to look like shakes or tile but are made of coated steel, so they give a more traditional look than long panels. They’re a good fit when you want the durability of metal without changing the style of a neighborhood that leans toward tile or shake. We install metal shingles from GAF and similar makers, and we make sure the underlayment and flashing are right, since those hidden layers are what keep the roof dry.
Corrugated Metal Roofing
Corrugated metal is the wavy, exposed-fastener product you see on barns, sheds, and some homes, and it’s the most budget-friendly way into metal. It works well on outbuildings, patio covers, and simple roof shapes, though it needs regular checks on the screws and washers. We’ll tell you honestly when corrugated makes sense and when a standing seam panel will save you repairs down the road on a Summerlin house.
Aluminum & Steel Roofing
Aluminum and steel are the two workhorses of metal roofing, and each has a place in our climate. Aluminum resists rust, which helps near the coast or in areas with more moisture, while steel is strong and takes a coating well against the sun. We’ll walk you through the trade-offs for your specific roof and pitch, and we install both. The right call depends on how the roof is framed and how much shade it gets.
Metal Roof Repair
Metal roofs aren’t maintenance-free, and small problems turn into leaks fast if you ignore them. Loose fasteners, worn washers, backed-out screws, and failed sealant at penetrations are the usual suspects, and they show up as stains on the ceiling after a storm. We find the source, replace the failed pieces, and reseal properly instead of smearing caulk over the symptom.
Metal Roof Coating
A reflective coating can extend the life of an older metal roof and cut heat gain, which matters when summer afternoons push past 100 degrees. We clean and prep the surface, then apply a coating rated for our sun exposure, so it holds up instead of peeling in a year. It’s a practical option when the panels are still sound but the finish has chalked or faded.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Brands We Service for Metal Roofing
We install and repair metal roofing from the manufacturers Summerlin homeowners actually ask about. GAF metal systems are common on newer builds, and we know how their panels and trim pieces are meant to fit together, which saves time when a job needs matching parts. Boral products show up on homes that want a tile look in metal form, and we’ve set plenty of them.
We also work with Atlas and Tamko on the steel side, and we know where each maker’s panels tend to wear, from the fasteners to the edge trim. Whether you have GAF, Boral, or any other make, we can help. We don’t claim to stock parts or be a dealer for anyone, but we know the products and we know how to fix them right. Same address since 1996, and a real person answers when you call.
Signs You Need Metal Roofing Right Now
Metal roofs fail slowly and quietly, so catching the signs early saves money. Here’s what to watch for in Summerlin.

- Rust spots or streaking on the panels. Surface rust is common on older steel, but once it pits through the coating, the panel is on borrowed time. Streaks that won’t wash off usually mean the finish is breaking down.
- Ceiling stains after a monsoon storm. A brown ring on the drywall means water is getting past the panels or the flashing. It won’t fix itself, and the next storm usually makes it worse.
- Loose or missing fasteners. Walk the roof line after a wind event and look for backed-out screws or popped washers. Missing fasteners let water in and let panels lift in the next gust.
- Visible dents or panel damage. Hail and falling branches can dent panels and crack the coating, which opens the door to rust. A dented panel is a weak point that needs attention.
- Water pooling on low-slope sections. If water sits on a flat or low-slope metal roof for more than a day, the seams and sealant are taking a toll. That pooling points to a pitch or drainage issue worth checking before it leaks inside.
Our Metal Roofing Process – Step by Step
- 1
Free estimate and second opinion. We come out, measure the roof in squares, and take deck photos so you see what we see. If you already have a written estimate from someone else, we’ll give you a free second opinion on it. No trip charge inside our own county.
- 2
Written line-item quote. You get the numbers in writing before anyone touches the roof, so there are no surprises at the door. We list materials, labor, and any deck repairs separately.
- 3
Tear-off and deck inspection. We remove the old roofing and check the sheathing for soft spots, rot, and bad framing. Any deck repair gets priced before we continue.
- 4
Installation. Underlayment goes down first, then panels or shingles, then flashing at valleys, penetrations, and edges. We set the fastening pattern to earn the wind rating, because the pattern matters more than the shingle or panel wrapper.
- 5
Final walk and promise. We walk the roof with you, clean up the site, and hand over the written 90-Day Done Right Promise. If something’s not right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roofing Cost in Summerlin?
Metal roofing in Summerlin generally runs higher than asphalt but lower than premium tile, and the range is wide because metal covers so many products. As a rough guide, corrugated metal on a simple roof usually lands at the low end, standing seam sits at the top, and metal shingles fall in between. A typical standing seam job on a Summerlin home often runs roughly $1,200 to $2,200 per square installed, with metal shingles landing lower and corrugated lower still. Small repairs and recoating cost far less than a full roof.
Several things move the number: roof complexity, pitch, how many penetrations there are, whether the old roof needs a full tear-off, and any deck repairs we find. Copper or premium finishes push it higher than standard steel. The way to avoid overpaying is to get a written line-item quote and a square count you can compare against other bids. Our free estimate includes the square count, the materials, and the labor, all in writing, and you can ask for a second opinion on any bid. Call (844) 951-4545 for an exact figure for your roof; estimates are free.
Metal Roofing Near Summerlin – Our Service Area
We work throughout Summerlin and the surrounding valley, including the neighborhoods off the 215 and out toward Red Rock. We also cover nearby communities like Spring Valley and Las Vegas, plus Enterprise, Winchester, and the rest of the valley. Response times depend on where you are and what’s going on, but inside our own county there’s no trip charge. If you’re nearby, see our Metal Roofing in Spring Valley page for that area.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Metal Roofing in Summerlin
Metal roofing is a roof covering made from steel, aluminum, or copper formed into panels or shingles. It’s known for long life, good wind and fire resistance, and reflecting a lot of the sun’s heat, which helps in a hot climate like Summerlin’s. The main types are standing seam panels, metal shingles, and corrugated sheets, and each has its own install method and price point.
A typical residential metal roof in Summerlin takes several days to a couple of weeks, depending on the size and complexity of the roof. Simple roofs with few penetrations go faster than complex roofs with valleys and dormers. We’ll give you a realistic timeline in the written quote, and weather can stretch it a little. Call (844) 951-4545 to talk through your roof and get a schedule.
Most Summerlin metal roof jobs land roughly between $1,200 and $2,200 per square installed for standing seam, with metal shingles and corrugated costing less. The exact figure depends on roof size, pitch, tear-off, and deck condition. Small repairs and recoating are far cheaper than a full replacement. Call (844) 951-4545 for a free written estimate with a real square count.
Yes, we install and repair GAF and Boral metal roofing, along with Atlas, Tamko, and other makes. We know how each maker’s panels and trim fit together, which helps when a repair needs matching pieces. Whether it’s a full install or a small fix, we can help. Call (844) 951-4545 to set up a free estimate.
We take storm and leak calls, and a live person answers the phone 24/7 at (844) 951-4545, including nights and weekends after a storm. If a monsoon gust or a branch opens a leak, we’ll get you on the schedule and stop the water from getting worse. Planned installs and coatings are scheduled during normal hours, but emergency calls don’t go to voicemail.
Every roofing job we do is backed by our written 90-Day Done Right Promise: if it’s not done right, we make it right, and one call brings us back. Manufacturer warranties on panels and coatings vary by product, and we’ll walk you through what applies to yours. Our promise is in writing on every job, big or small.
The main thing is to clear the driveway and move vehicles so we can stage materials, and to move anything fragile away from the walls where crews will work. We’ll walk the site before start and let you know what to expect day to day. You don’t need to do any prep to the roof itself; that’s on us. Call (844) 951-4545 with any questions before we start.
Schedule Your Metal Roofing Service in Summerlin Today
Whether you need a full standing seam install, a leak sorted out, or a straight answer on what your roof can take, we’re happy to come out and give you a free, no-obligation estimate. Our technicians have up to 30 years of experience, every job is covered by our 90-Day Done Right Promise, and a live person answers the phone 24/7. Call Shepherd & Sons Roofing Summerlin at (844) 951-4545 to schedule your free estimate.
Written by the team at Shepherd & Sons Roofing Summerlin.