Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Spring Valley
If you live in Spring Valley, NV and your tile or shingle roof is closing in on its first full replacement, a metal roof is worth a real conversation. We know the 89113 subdivisions, the stucco tract homes built through the 1990s and 2000s, and what the valley’s monsoon microbursts do to a roof that was never detailed for them. When you call (844) 951-4545, a live person picks up and we’ll be there to look at your roof, not just quote it over the phone. Local expertise matters here because the failure that sinks a cheap metal job in Spring Valley isn’t the panel. It’s everything under it.
Why Shepherd & Sons Roofing Summerlin Is Spring Valley’s Preferred Metal Roofing Company
Spring Valley homeowners call us because the name on the truck is the name on the license, and that name has been at the same address since 1996. Out-of-state storm chasers roll through after every hailstorm and quote one number on the phone and another at the door. We publish our address, we answer our own phone around the clock, and every roofing job carries the written 90-Day Done Right Promise. If something isn’t right, one call brings Bill back.
Our technicians have up to 30 years of experience, and Bill’s own sons are on the roof with the crew. For Spring Valley, that means we’ve walked a lot of these streets, and we know what a 2002 build in 89113 looks like under the tile twenty-some years later. We quote no-hassle upfront pricing, there’s no trip charge inside our own county, and we’ll give you a free second opinion on any written estimate you already have. Ask anyone on your street.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Spring Valley
Metal is the right answer for a lot of Spring Valley roofs, but the right system depends on the house, the pitch, and what’s underneath. Here’s where we spend most of our time.
Standing Seam Metal Roof
A standing seam roof is the cleanest long-term move for a Spring Valley home with a straightforward pitch and good decking. The panels float over concealed fasteners and move with the heat, which is why the detailing at the parapets and fascia matters so much in this climate. In 89113, we rebuild that detailing rather than reuse what the original stucco build left behind.

Metal Shingle Roofing
Metal shingles suit Spring Valley’s Mediterranean-style subdivisions where a homeowner wants the look of the original tile or shingle without the weight and the cracking mortar. Brands like Boral and Tamko make profiles that fit the neighborhood. The wind-rated fastening pattern is what earns the rating, not the shingle wrapper, and we document it.

Corrugated Metal Roofing
Corrugated panels are a practical, budget-conscious option for sheds, patios, and the simpler rooflines around Spring Valley. They’re not the right call on every home, and we’ll tell you straight when they aren’t. Where they fit, they hold up well under the desert sun.

Aluminum & Steel Roofing
Aluminum and steel systems both handle the 100°F-plus summers and the UV load, but they expand and contract differently, and that changes the fastening and flashing details. We match the material to the roof and the budget, and we install products from GAF, Boral, and Atlas among others. Name the system and we’ve likely set it.
We also handle Metal Roofing repair and coating when a full replacement isn’t the right call yet.
Trusted Brands We Service in Spring Valley
We install and work with products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. If you’ve settled on a shingle or panel by name, chances are good we’ve set it before. We don’t stock parts locally or promise a truck loaded with your material, but we know these systems and we get the right components to your Spring Valley roof with a fast turnaround. The point isn’t the brand logo on the wrapper. It’s that a documented, name-brand system with a properly installed wind rating is what protects you when the monsoon hits.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Spring Valley Homes
Most of what goes wrong on a Spring Valley metal roof traces back to the retrofit, not the metal itself. Here’s what we find.
- Wind uplift at panel edges and the ridge. The original stucco-and-tile fascia on these 1990s and 2000s homes was never detailed for a metal system’s expansion and fastener pull-out. Under a monsoon microburst, that’s the first place a panel lets go.
- Baked-out underlayment and hidden decking rot. A tile roof in Spring Valley can look watertight from the street while the felt beneath has baked to dust. A cheap “overlay” metal job traps that moisture and fails at the valleys and penetrations.
- UV-degraded sealant and flashing. Soffit, fascia, and pipe boots pass a dry-season look and then leak in the first sustained downpour. The sun eats sealant faster here than in cooler climates.
- Dust-laden rain intrusion at penetrations. The valley’s rain arrives dirty, and every penetration is a place it can work its way in. Reflashing at install is the answer, not caulk later.
In Spring Valley’s 89113, a metal roof has to be engineered for two loads at once: monsoon microburst wind uplift and rain intrusion at every penetration, on top of the UV bake. A generic “desert roof” pitch covers the heat and misses the wind. That’s the difference between a roof that lasts and one that’s back open after the first August storm.
Pricing for Metal Roofing in Spring Valley, NV
Honest numbers, up front. Metal roof repair in Spring Valley typically runs $350 to $1,200 depending on what’s failed and how much flashing gets rebuilt. A metal shingle or corrugated re-roof often lands between $9 and $16 per square foot installed, while a standing seam system on a full tear-off generally runs $14 to $22 per square foot. A typical 1,800 to 2,200 square foot Spring Valley home usually falls somewhere in the $28,000 to $48,000 range for a full standing seam job. What moves the number: tear-off to the decking, how much substrate has to be replaced, the complexity of the roofline, and whether the parapets and fascia need rebuilding for a panel’s thermal movement.
A roof is measured in squares, so ask any bidder how many they counted. We’ll show you the deck photos before we talk money, give you a free estimate and a free second opinion on any written bid, and there’s a $40 credit on any repair over $200. Call (844) 951-4545 to schedule a free estimate.
We Also Serve Cities Near Spring Valley
We take care of Metal Roofing in Spring Valley and the towns around it, including Summerlin, Enterprise, Paradise, and Winchester. If you’re just over the line in one of those communities, the same crew and the same promise apply. We’ll be there with a free estimate and a straight answer.
Serving Spring Valley, NV – Our Local Coverage Area
We serve Spring Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Spring Valley
A metal roof in Spring Valley should be installed to a wind-uplift rating the manufacturer documents for the system, and the fastening pattern is what earns it. The valley’s monsoon microbursts test edges and ridges hardest, so the rating has to cover the whole assembly, not just the panel. Ask for the manufacturer’s wind-rating paperwork before you sign, and call (844) 951-4545 for a free estimate.
Because the underlayment beneath the tile has usually baked brittle while the tile itself still looks sound. The classic 89113 failure is a tile roof that stays watertight-looking until the first August monsoon drives water straight to the ceiling. That’s a sign the roof is at its replacement window, not a quick-patch job. Call (844) 951-4545 for a free second opinion on what’s actually under there.
A compliant quote in 89113 includes tear-off to the decking, replacement of failed substrate, new underlayment and ice and water shield at the valleys and eaves, a wind-rated fastening pattern, new drip edge, reflashed penetrations, and the manufacturer’s wind-rating documentation with inspection sign-off. A cheap bid skips the tear-off and the paperwork, and that’s exactly what fails. Call (844) 951-4545 and we’ll walk a line-item quote with you.
Yes. After a microburst, an insurer asks for the manufacturer’s wind-rating documentation and the inspection sign-off, and that paper trail is what supports a claim. A roof installed without it can leave you arguing about coverage you should have had. Keep the closeout documents with your home file. Call (844) 951-4545 for a free estimate that includes the paperwork.
Compare the scope line by line, not the bottom number. Check that both quotes count the same squares, include a full tear-off to the decking, rebuild flashing at parapets and fascia, and hand over the wind-rating documents. A lower bid that skips the deck inspection or the documentation isn’t cheaper; it just moves the cost to your ceiling. Call (844) 951-4545 for a free second opinion on any written estimate.
Here’s how it usually goes when a Spring Valley roof reaches the end: the surface still looks fine, the underlayment is shot, and the first sustained storm finds the weak spots. Getting it right means pulling the old covering to inspect the decking, replacing what’s failed, installing new underlayment and ice and water shield at the valleys and eaves, then setting the panels or metal shingles with a wind-rated pattern, new drip edge, and reflashed penetrations. The closeout hands you the manufacturer’s wind-rating documents and the inspection sign-off. That’s the paper trail that matters at claim time.
Call (844) 951-4545 for a free estimate on metal roofing in Spring Valley. A live person answers, we’ll show you the deck photos before we talk money, and the written 90-Day Done Right Promise comes with every job. Senior and veteran customers get 10% off, and there’s no trip charge inside our own county.
Written by the team at Shepherd & Sons Roofing Summerlin.