Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Paradise
Metal roofing in Paradise isn’t a pitched-shingle swap. This is an unincorporated community where nearly every metal job we scope runs over low-slope commercial roofs, shade structures, and mid-century apartment decks along the resort corridor. We know that difference, and we quote it honestly. Our technicians have up to 30 years of experience and we install products from GAF, Boral, and Tamko. Call (844) 951-4545 and a live person picks up, nights and weekends included. We’ll show you the deck photos before we talk money, and every metal job carries our written 90-Day Done Right Promise.
Why Shepherd & Sons Roofing Summerlin Is Paradise’s Preferred Metal Roofing Company
Paradise property owners call us back because the estimate matches the invoice. That’s plain, and it’s rarer than it should be. We’re owner-operated, locally owned, and we’ve kept the same address since 1996. When storms roll through Paradise and out-of-state crews show up with lowball door-knocks, ask them where their shop is. We’ll tell you ours in one sentence.
Our reputation in Paradise is built on commercial flat-roof and low-slope metal work: standing seam overhangs, repair of laps and fasteners, and coating jobs that buy a resort-corridor building another decade before replacement. We validate our approach with a free second opinion on any written estimate you’ve already got. Honest upfront pricing, no trip charge inside our own county, and the flat truth about what your roof can and can’t take under that summer sun.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Paradise
Standing Seam Metal Roof
On Paradise’s older low-slope overhangs and shade structures, standing seam makes sense when the panels can be fastened clean and the flashing and drip edge get detailed for open, wind-exposed edges. We walk the decking and underlayment from below where possible before we quote. If the panels can be saved and re-coated, we’ll say so. If they can’t, we’ll show you why.

Metal Shingle Roofing
Mid-century apartments and condos scattered through Paradise often sit under low-slope roofs where a metal shingle system on the steeper sections gives a cleaner look without a full rebuild. We spec the flashing and valleys against the actual pitch and drainage of each building, not against a generic template.

Corrugated Metal Roofing
Corrugated is still a workhorse on outbuildings and covered areas around the Convention Center district. The nailing pattern earns the wind rating, not the shingle wrapper. We verify every fastener line and lap against what monsoon microbursts actually do to an edge panel in Paradise.

Aluminum & Steel Roofing
Aluminum holds up against the Mojave UV and dry cycles without the rust risk that shows up on older galvanized steel. Steel is the better call where structural load and budget allow. Either way, we quote material and finish by the square, and we’ll tell you which is the right fit for your building.
Trusted Brands We Service in Paradise
We install from GAF, Boral, and Tamko, and we’ll name the panel profile and finish in writing on the quote. We don’t claim to stock parts locally; what we do is source the right material for your panel system and get it to your Paradise building on a schedule that fits the work. If your existing roof uses a profile from another maker, tell us and we’ll confirm compatibility before we promise anything.
Common Metal Roofing Problems We See in Paradise Homes
- Fastener back-out and panel lap sealant failure. Surface temperatures on exposed metal over low-slope and shade structures routinely push past 150°F in July, and that heat plus UV cooks the sealant at laps and penetrations long before the panel itself rusts.
- Corner and edge panel lift during monsoon microbursts. When flashing and drip edge were never detailed for open, wind-exposed edges, the first inch-an-hour storm peels corners back.
- Ponding and corrosion at penetrations and scuppers. Metal panels meeting flat-roof drainage that clogs and backs up turn a small leak into a fastener and decking problem fast.
- Chalky, faded coating on older panel systems. Coating breakdown in Paradise’s UV load is the earliest warning sign that a re-coat or replacement decision is coming.
See the difference
Before
After
Before
After
Before
AfterPricing for Metal Roofing in Paradise, NV
A typical metal roof repair in Paradise runs $400 – $1,500 for fasteners, sealant, and small panel fixes; a metal roof coating on a low-slope commercial roof runs $2.50 – $5.50 per square foot installed; and standing seam replacement on the same roof runs $12 – $22 per square foot depending on panel profile, insulation, and how much drainage correction the job needs. What moves the price most: whether the decking can be saved, whether flashing and drip edge terminations need rebuilding, and how much scupper and drain work the quote includes. Estimates are free. Call (844) 951-4545 and we’ll walk the roof with you.
We Also Serve Cities Near Paradise
We work across the surrounding area, including Winchester, Whitney, Spring Valley, and Enterprise. If you’re just outside Paradise and want the same flat-honest metal roofing quote, we’ll come out. See our Metal Roofing in Paradise page for the full run of what we do here, and our Metal Roofing hub for the deeper technical walk-through.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Paradise
Paradise is an unincorporated township in Clark County, so metal roofing permits and inspections run through the county, not a municipal building department. That changes the paperwork and inspection sequence, and we scope it into the quote so nothing lands as a surprise mid-job. Call (844) 951-4545 for an exact quote.
Because exposed metal over low-slope and shade structures bakes past 150°F in summer, and the sealant at every fastener and lap cooks out long before the panel itself rusts. We start every repair by walking the decking and underlayment from below where we can, checking flashing and drip edge termination, and confirming whether re-fastening and re-coating will save the panels or replacement is the honest answer. Call for a free estimate.
It’s usually the difference between a repair that lasts and one that doesn’t. The first July microburst is what exposes corner-lift panels and clogged scuppers, so a proper quote pairs panel repair with drainage correction. We scope that work in writing before anyone touches the roof. Call us for an exact number.
Often yes, but only after we’ve verified the decking, insulation, structural load, and drainage can handle it. A panel profile that looks right in a brochure can be the wrong call over an older deck, and the honest answer comes from walking it. Free second opinions on any written estimate are always available. Call (844) 951-4545.
Ask each bidder for the square count, the panel profile and manufacturer, the fastener and flashing spec, and whether drainage correction is included. A roof is measured in squares, and two bids that look close in price rarely match once you line up the spec. We’ll bring a written second opinion on any estimate you’ve already got, and give you the numbers side by side.
Call Shepherd & Sons Roofing for Metal Roofing in Paradise
Metal roofing in Paradise is a different trade than it looks from the outside: county permits, low-slope decks, panel laps that fail at the fasteners, and drainage that gets tested every July. If you want a quote that matches the invoice and an owner who answers his own phone, call (844) 951-4545. Free estimates, free second opinions on any written bid, and the 90-Day Done Right Promise in writing on every job.
Written by the team at Shepherd & Sons Roofing Summerlin.