Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Henderson
Metal roofing in Henderson, NV runs roughly $14,500 to $38,000 for a typical full re-roof, and most of that spread comes down to panel type, roof complexity, and how much sun-baked decking has to be replaced once the old material comes off. Henderson sits in one of the harshest UV environments in the country, so the difference between a metal roof that lasts 40-plus years here and one that fails early comes down to how it’s specified and installed, not the pitch. Call us at (844) 951-4545 and we’ll get you a written, line-item estimate.
Why Shepherd & Sons Roofing Summerlin Is Henderson’s Preferred Metal Roofing Company
We’ve been building roofs in the Henderson area long enough to know the difference between a roof that’s failing because of rain and one that’s failing because of sun. In Green Valley, Anthem, and MacDonald Ranch, that difference matters. Henderson doesn’t get much rain. It gets heat – relentless, 105-115°F heat that works on underlayment, sealant, and fasteners in ways a coastal roofer never has to think about. Our technicians have up to 30 years of experience, and that experience is built on desert roofs, not transplants.
Henderson customers call us back because we do things the straightforward way. We show you the deck photos before we talk money. We give you a written estimate with line items, not a lump number on a napkin. We pull the permits and we pass the inspections. And every job comes with our written 90-Day Done Right Promise – if something’s not done right, one call brings us back to make it right.
Calls are answered by a live person, 24/7. Not a voicemail, not a call center, not a form that goes into a queue. A real person picks up, because when a monsoon blows through in July and you’ve got panels lifting, you don’t want to leave a message.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Henderson
Standing Seam Metal Roof
Standing seam is the go-to choice for Henderson homeowners who want maximum lifespan with a clean look, and it’s the panel type most affected by our local heat cycling. In foothill neighborhoods like Anthem and MacDonald Ranch, panels on south- and west-facing slopes go through daily expansion and contraction that panels on shaded north slopes never see, so clips and spacing have to be specified with that asymmetry in mind. A properly installed standing seam roof here has concealed fasteners and a thermal allowance built in, not an afterthought.

Metal Shingle Roofing
Metal shingle gives Henderson homes the look of traditional tile or shake without the weight or the breakage. That matters in older 1990s subdivisions where the original concrete tile is chipping and the homeowner wants something lighter that can handle 100-plus-degree summers without cracking. Metal shingle also holds up better than asphalt shingle when monsoon-driven hail comes through between July and September.

Corrugated Metal Roofing
Corrugated panels are the workhorse option for Henderson properties with simpler rooflines, outbuildings, and low-slope sections. They cost less per square than standing seam, they go on faster, and they handle desert heat well when installed with the right underlayment and fasteners. The key on corrugated in Henderson is using fasteners and washers rated for UV exposure, since the rubber grommets degrade faster under Mojave sun than most people expect.

Aluminum & Steel Roofing
We install both aluminum and steel panels depending on what your roof and your budget call for. Steel is stronger and often the better choice for larger expanses and long spans. Aluminum weighs less, resists corrosion well, and handles the thermal movement of a Henderson summer without issue. If you’ve got a custom home in the foothills with mixed roof planes, we’ll walk the roof and talk through which material makes sense for each section. Our Metal Roofing team has done this enough times to spot the problem areas before work starts.
Trusted Brands We Service in Henderson
We install products from the manufacturers Henderson homeowners know and trust. If you’ve got a specific panel or shingle profile in mind, tell us – we’ve likely set it. Among the brands we work with are Owens Corning, IKO, Tamko, Atlas, GAF, CertainTeed, and Boral. We don’t carry stock; every panel, trim piece, and accessory is ordered to your job, which means you get exactly what the spec calls for rather than a substitution. Because Henderson’s heat demands specific thermal and UV-rated materials, the right product on the right roof matters more here than in milder climates.
Common Metal Roofing Problems We See in Henderson Homes
- Fastener back-out and clip fatigue. Daily thermal expansion cycling in 105-115°F heat works on standing seam fasteners and clips over time. It’s most acute on south- and west-facing slopes, where panels move the most, and it’s the first thing we look for on any Henderson repair call.
- Monsoon wind damage at edges and ridge caps. The July-September monsoon brings fast wind gusts that work grit and lifted edges under panels on foothill roofs in Anthem and MacDonald Ranch, exposing underlayment underneath. Once underlayment is exposed to UV, it degrades quickly.
- Sealant and flashing failure at penetrations. Desert roofs leak at the details, not the field. Intense UV breaks down sealant at valleys, vents, and pipe boots years before the panels themselves fail. This is why we specify proper specialty flashings rather than improvising with caulk.
- UV-brittle underlayment on older homes. The 1990s-2000s master-planned subdivisions across Green Valley, Anthem, and MacDonald Ranch are hitting the 20-25 year window now, and the underlayment under original tile and shingle has often already failed from heat exposure. When it does, the panels or shingles above it aren’t far behind.
See the difference
Before
After
Before
After
Before
AfterPricing for Metal Roofing in Henderson, NV
Here’s what metal roofing actually runs in Henderson. A standing seam roof on a typical 2,000-2,500 square foot single-story home runs $22,000-$38,000, depending on roof complexity and which slopes need decking replaced. Metal shingle in Henderson runs $16,000-$26,000 on the same footprint. Corrugated metal on a simpler roofline runs $14,500-$22,000. Aluminum and steel panel systems land in the $18,000-$32,000 range. A standalone metal roof repair runs $450-$2,400 depending on what’s failed. Metal roof coating, which extends the life of an existing metal roof, runs $2,800-$7,500. These ranges reflect Henderson’s market and the cost of doing the work right in a high-UV environment.
Every estimate is free and itemized. We give you a fixed price in writing – no change orders mid-job unless something genuinely unexpected turns up in the decking, and we’ll show you photos and get your approval before we proceed. We also offer $40 off any repair over $200, a free second opinion on any written estimate you’ve already received, and 10% off for seniors and veterans.
Why Henderson’s Replacement Wave Matters for Metal Roofing
Henderson is in what we call a wave replacement market. The massive build-out of Green Valley, Anthem, and MacDonald Ranch happened in the 1990s and 2000s, and thousands of those roofs are hitting the 20-25 year replacement window at the same time. That means your street may have three or four neighbors re-roofing in the next two years, which matters if you’re considering metal: the long-lead items – custom-bent panels, trim, ridge vent, and fascia-matched caps in your specified color – can take weeks to arrive, especially when demand across the valley spikes. On a metal roof, lead times, not labor, usually set the calendar.
Here’s how a Henderson metal roofing job usually goes on a home whose tile or shingle has already failed on the south and west slopes. The crew starts at the decking, because once the old material is stripped, UV-brittle underlayment and heat-cycled fasteners turn up underneath. A qualified local pro checks the decking, installs proper underlayment with ice and water shield at valleys and penetrations, sets drip edge and starter strip, and spaces standing-seam panels and clips to allow the thermal movement that 110°F summer highs demand. The custom panels and trim are ordered only after the price is fixed in writing, so you know what you’re paying before anything ships.
We Also Serve Cities Near Henderson
We work throughout the Henderson area and the surrounding communities. If you’re in Boulder City, Whitney, Paradise, or Enterprise and you’re looking for Metal Roofing in Henderson and the nearby communities, give us a call. The same desert conditions apply across the valley, and the same written estimate, fixed pricing, and 90-Day Done Right Promise come with every job.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Henderson
Because on a metal roof, the fabricated panels, trim, and accessories are custom-bent to your roof’s measurements and can take weeks to arrive, especially during busy replacement seasons. Installation itself is typically 3-5 days on a standard Henderson home. The schedule is set by when the materials land, not how fast the crew works. We order only after the price is fixed in writing, so you’re not waiting on panels for a job whose price hasn’t been locked. Call (844) 951-4545 for a free estimate.
Yes, significantly. Henderson’s 105-115°F summer highs mean daily thermal expansion and contraction that panels on south- and west-facing slopes experience more than shaded north planes. Panels and clips must be spaced and specified to allow that movement, or you get fastener back-out and clip fatigue years early. In a milder climate, that thermal allowance is a footnote; in Henderson, it’s the deciding factor on how the roof performs. Call for a free walkthrough and we’ll show you what we mean.
In most cases, no, and here’s why: on Henderson homes of this age, the underlayment beneath the original tile or shingle has usually already degraded from heat, and covering it traps the failure underneath. The right approach is to strip to the decking, inspect for water damage, and install proper underlayment and flashing before panels go on. Occasionally a roof can be overlaid, but we’ll show you photos of what’s underneath before recommending either path. Estimates are free.
On a high-end job, we work directly with the designer from the start of the specification, not after plans are set. That means reviewing panel profiles, color, trim, and flashing details before the order goes out, so we can flag lead times, custom fabrication needs, and thermal design considerations early. We also give a written, line-item estimate you can submit alongside the architectural package. Call (844) 951-4545 to set up a consultation.
Standing-seam roofs with widespread clip fatigue on the sun-facing slopes are the hardest to repair, because the failure runs across the panel system rather than at one spot. Foothill homes in Anthem and MacDonald Ranch with mixed roof planes and lifted ridge caps can also turn into more than a spot fix once water has gotten under the panels. If you’re on the fence, we’ll give you a free second opinion on any estimate you’ve already been handed and tell you honestly whether a repair or a replacement makes more sense. Call (844) 951-4545.
Written by the team at Shepherd & Sons Roofing Summerlin.