Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Winchester
Metal roofing in Winchester, NV looks different from what most metal roofing pages describe. If you own a building or a home in ZIP 89109, chances are you’re working with a flat or low-slope roof, not a steep shingle slope. That changes how panels are measured, how they tie in, and how the job gets staged on a tight lot between the Strip and the airport. Shepherd & Sons Roofing Summerlin works these roofs regularly, and we know the corner of Winchester where Paradise Road density meets mid-century construction. Call (844) 951-4545 and a live person picks up, day or night.
Why Shepherd & Sons Roofing Summerlin Is Winchester’s Preferred Metal Roofing Company
Shepherd & Sons has been locally owned and owner-operated, at the same address, since 1996. Bill Shepherd’s name is on the license and on the work, and the guys on the roof are Bill and his crew, background-checked and steady. When you call, you get a real person, not a call center and not a form that goes nowhere.
Winchester homeowners and property owners have leaned on us for metal roof repair and coating work because we show the deck photos before we talk money. Every roofing job carries our written 90-Day Done Right Promise, so one call brings Bill back if something’s off. We also offer a free second opinion on any written estimate, no trip charge inside our own county, and $40 off any repair over $200.
Our technicians have up to 30 years of experience, and that matters on Winchester’s tight lots where access, staging, and neighbor notice all shape the scope. Ask anyone on your street which roofer keeps a local address you can look up. The name on the truck is the name on the license.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Winchester
Standing Seam Metal Roof in Winchester
Standing seam is the workhorse for sloped sections and covered walkways around Winchester, and it’s often the right answer where a metal panel meets a flat-roof field at a parapet. Panels run long and clean, with concealed fasteners that don’t back out in desert heat. On the tight lots near the UNLV corridor, panel length and delivery route get figured into the plan before anyone quotes a number.

Metal Roof Repair in Winchester
Most repair calls we get in Winchester start with a leak at a scupper or where metal trim meets modified-bitumen. Sealant cracks fast under near-zero humidity and hard UV, and fasteners loosen as summer heat works metal over decking that was never re-secured. We find the actual source before we patch anything, and we put the fix in writing.

Metal Roof Coating in Winchester
Coating buys years on a flat or low-slope assembly that’s still sound but baking under McCarran-adjacent sun. Summer surface temps on dark flat roofs in Winchester routinely push past 150°F, and a reflective coating takes real load off the membrane. We check drainage and scupper sizing first, because coating over a ponding roof just hides the problem.

Metal Shingle and Corrugated Metal in Winchester
On the scattered older single-family homes in Winchester with aging asphalt shingles, metal shingle and corrugated profiles give you the look of a traditional roof with far less maintenance. Both are worth pricing against a straight re-roof, especially where a low slope meets a pitched section and you want one continuous material story. We install products from GAF and Boral, and we’ll tell you which profile fits your deck.
Trusted Brands We Service in Winchester
We install products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Name the panel or the shingle and we’ve likely set it. We don’t claim to stock parts locally and we don’t run a warehouse in Winchester. What we do is measure, order to the job, and get the material to your site without a long stall. On a tight 89109 lot, timing is part of the quote, not an afterthought.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Winchester Homes
- Ponding at parapet scuppers after July – September downpours. Monsoon bursts overwhelm undersized scuppers, water backs up, and metal panels tied into aging modified-bitumen start to rust and leak. We check drain and scupper sizing before we ever quote a membrane or panel replacement.
- Sealant and flashing cracking under UV and dry air. Where metal meets the flat-roof field, near-zero humidity and hard sun crack sealant fast. That joint is the first place a Winchester leak shows up.
- Fasteners and perimeter trim loosening in extreme heat. Metal expands and contracts hard over a Las Vegas Valley summer. If the decking under it was never re-secured, fasteners back out and trim lifts.
- Original or one-replacement-old assemblies well past service life. Much of the mid-century roof stock in Winchester is original or one replacement old. At that point, repair versus replacement is a real conversation, and we’ll show you the photos to have it honestly.
Pricing for Metal Roofing in Winchester, NV
A typical metal roof repair in Winchester runs $350 – $1,200 depending on access and how much transition detailing is involved. Metal roof coating on a flat or low-slope assembly generally runs $3.50 – $7.00 per square foot. Standing seam on sloped sections typically runs $12 – $22 per square foot installed, and full metal shingle or corrugated re-roofs land in the $9 – $16 per square foot range. What moves the number most in Winchester is access and staging on a tight lot, plus how the metal ties into existing flat-roof membrane at parapets and scuppers. Longer panels and harder delivery routes push cost up. We give you a written line-item estimate up front, and we offer a free second opinion on any other bidder’s number. Call (844) 951-4545 for a free estimate.
We Also Serve Cities Near Winchester
We work metal roofing across Winchester and the surrounding east valley, including Paradise, Las Vegas, Whitney, and Sunrise Manor. If your building sits near the ZIP 89109 line or just past it, the same flat-roof and tight-lot know-how applies. Our Metal Roofing team can scope it and quote it in writing.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Winchester
Yes, but usually as standing seam tied into a flat-roof field at parapets and scuppers, not as a full-slope tear-off. Most 89109 roofs are flat or low-slope, so the real question is transition detailing and drainage, not panel style. A qualified pro evaluates scupper sizing and flashing tie-ins before quoting panels. Call (844) 951-4545 for a free estimate.
Tight-lot density drives access and staging, which directly shape the scope and the number. On lots along the Paradise Road and UNLV density, panel length, delivery route, and where the crew stages material all get assessed before we quote. Parking and shared-wall notice can add cost a wide-open suburban lot wouldn’t carry. Call (844) 951-4545 to talk through your site.
Check drainage and scupper sizing first, then decking, underlayment, and drip edge at the transition. Ponding at undersized parapet scuppers after monsoon bursts is the most common failure we see in Winchester, and coating or panels over a ponding roof just hides it. A repair-versus-replace call on aging modified-bitumen comes next. Call (844) 951-4545 for a second opinion on any written estimate.
Yes. Proximity to McCarran’s flight paths and the Strip means noise, access, and working-hour constraints that don’t apply elsewhere in the valley. A metal roofing scope near those corridors has to plan around them, and that planning belongs in the quote. We build it in up front so nobody gets surprised mid-job. Call (844) 951-4545 to scope yours.
Compare on scope, not on the bottom number: membrane-to-metal transition detail, drainage and scupper sizing, decking re-securing, and staging plan should all be spelled out line by line. A bid that skips those is missing the costly part in Winchester. We’re happy to give a free second opinion on any written estimate, backed by our 90-Day Done Right Promise in writing. Call (844) 951-4545 for a free estimate.
Metal roofing in Winchester isn’t a copy-paste roof job, and we don’t treat it like one. If you own a building or home in ZIP 89109 and want an honest number with the deck photos in hand first, call Shepherd & Sons Roofing Summerlin at (844) 951-4545. A live person answers, day or night, and the estimate is free. If it’s not done right, we make it right, in writing.
Written by the team at Shepherd & Sons Roofing Summerlin.