Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Gutter Replacement: The Summerlin Owner’s Guide
We install CertainTeed-compatible gutter replacement throughout Summerlin, and a full run on a typical single-story home usually lands between $1,400 and $3,200 installed, with most jobs scheduled within a few days rather than weeks. If you’re just replacing a failed hanger or a short section, expect $180 to $450. Most owners don’t go looking for gutter work; they find it. Water starts sheeting off the back of a CertainTeed run and pooling at the foundation, or a fascia board behind the gutter goes soft, and the suspicion sets in that the system has been failing quietly for a season or two. That’s usually the moment we get the call.
Which CertainTeed Models This Applies To
CertainTeed makes gutters in aluminum and steel under the trade names that appear on the cartons and the order sheets. The residential aluminum lines run in 5-inch and 6-inch K-style profiles, and the 6-inch is the more common choice on newer Summerlin construction because it handles the volume off a large roof plane. Steel gutters follow the same profile logic but with different hanger spacing requirements. Seamless systems are rolled on site to your exact run length; sectional systems come in 10-foot pieces with seam covers and slip joints.
To identify what you actually have, measure the top opening across the gutter (5 or 6 inches), measure the depth of the profile, and check the hanger spacing along the run. Look at the inside of the gutter for a stamped mark or the profile of the end cap, which usually tells you the series. Then comes the OEM-vs-aftermarket question. A genuine CertainTeed hanger or end cap will match the profile exactly. A quality aftermarket hanger of the same size and gauge is often the smarter buy on a replacement because the aluminum gauge (typically .027 to .032 for residential) and the hanger spacing matter more to how long the gutter lasts than the logo on the bracket. We’ll tell you straight which way makes sense for your run. We’re an independent installer and not affiliated with CertainTeed.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Signs Your CertainTeed Gutter Replacement Is Failing
The failures are predictable once you’ve seen enough of them, and each one points to a specific cause.
- Water cascading over the front lip during rain. The gutter is either undersized for the roof area or a hanger has pulled loose and the run has lost its pitch. Both are fixable, but a sagging run usually means the hanger spacing was wrong from day one.
- Gutter pulling away from the fascia at a corner. A failed spike or hidden hanger, often because the fascia behind it has rotted from a long-running leak. Replacing the hanger without addressing the wood just delays the same failure.
- Rust streaks or pinholes in a steel run. Steel gutters in Summerlin’s dry-then-sudden-wet pattern tend to pit where water sits. Once pinholes appear, the run is on borrowed time and spot patching rarely holds through a monsoon.
- Soft or stained fascia board visible above the gutter. This is the one that matters most. It means water has been getting behind the gutter for a while. If the wood is soft, the gutter work becomes gutter-plus-fascia.
- Seams dripping at every joint. Sealant fails on a schedule in this climate. Repeated resealing is a sign the seams themselves have opened and the sectional system is ready to be replaced.
Replacement Cost & What’s Included
Pricing in Summerlin runs higher than rural Nevada because access, two-story runs, and older fascia repair add time. Here’s the honest range.
| Job | Installed Range |
|---|---|
| Single failed hanger or short section (under 10 ft) | $180 – $450 |
| Full seamless run, single story, standard length home | $1,400 – $2,400 |
| Full seamless run, two-story or complex roof line | $2,400 – $3,200 |
| Add fascia repair where wood is soft | $300 – $900 depending on linear feet |
| Downspout replacement, per run | $150 – $350 |
That number includes tear-off of the old run, new seamless gutter formed to length, hangers at correct spacing, end caps, downspouts, and cleanup. The range is driven by linear feet, stories, and whether fascia repair is needed. We give you the parts and labor broken out before anyone touches the roof, and the written 90-Day Done Right Promise rides on every job. If it’s not right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can check yourself safely from the ground with binoculars or from a ladder set on firm, level ground. Look for sagging runs, water stains on the fascia, loose hangers, and debris dams at the downspout outlets. Cleaning out a clogged outlet is fine to do yourself with gloves and a trowel.
Where DIY goes wrong: climbing onto a wet or pitched roof to pull a hanger, re-pitch a run, or replace a section. Gutter work is done at the edge of the roof, and a fall risk is a fall risk whether the job looks small or not. Re-pitching a run incorrectly makes the pooling worse, and replacing a hanger over rotten fascia just kicks the failure down the road. If the fascia is soft, don’t put weight near it. Call us at (844) 951-4545 and we’ll come out, look at the deck and the wood behind the gutter, and tell you what’s actually failing before you spend a dollar.
FAQs
Aluminum gutters in this climate typically give you 20 to 25 years when they’re installed with correct hanger spacing and pitched right; steel runs closer to 15 to 20 before pitting becomes a problem. Our intense sun and sudden monsoon downpours are the two stressors: UV degrades sealant faster than in wetter climates, and the volume off a large roof plane is unforgiving of a run that’s slightly off pitch. Call (844) 951-4545 for a free estimate on replacement.
Sometimes, yes. A single loose hanger, a clogged downspout, or a short section with a failed seam can often be repaired for well under $450 and last years. Full replacement is the right call when the run is sagging in multiple spots, pinholes are showing in a steel system, or the fascia behind it has gone soft. We’ll give you both options and tell you which one holds. Estimates are free.
A full seamless run on a single-story home is typically a one-day job, and two-story or complex roof lines usually take two. Fascia repair adds time if we find soft wood once the old gutter comes off. We schedule the work and tell you the window up front, and if we find something unexpected mid-job, you hear about it before we proceed, not after.
We order to your measured profile and length, whether that’s a genuine CertainTeed component or a quality aftermarket equivalent of the same gauge and fit. We don’t carry parts on a truck or stock inventory; everything is ordered to the job so you get the right size, not a close-enough guess. We also install gutter and accessory lines from GAF and Owens Corning when a different match suits your home better. Call (844) 951-4545 and we’ll walk you through the options for your specific run.
Get Your Gutter Sorted Before the Next Monsoon
If your CertainTeed gutter is sagging, leaking at the seams, or staining the fascia, the fix is straightforward once we know what’s actually failing. We’ll look at the wood behind the gutter, measure the run, and hand you a written estimate with the parts and labor broken out. Call (844) 951-4545 for a free estimate. A live person answers, day or night, and if you’re a senior or a veteran, ask about the 10% discount while you’re on the phone.
Written by the team at Shepherd & Sons Roofing Summerlin, serving Summerlin and nearby areas.