Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Ridge Vent Installation: The Summerlin Owner’s Guide
We install CertainTeed-compatible ridge vent for Summerlin homeowners, and most jobs land between $550 and $1,100 installed depending on roof length, pitch, and how much of the old vent and ridge cap has to come off. On a straightforward single-ridge home, two of the guys can usually finish it in one visit. You’ll know it’s time when the attic starts cooking in June, when shingles along the peak start curling, or when you spot daylight through the ridge line from inside the attic after a windstorm. That last sign is the one we see most in Summerlin.
Which CertainTeed Models This Applies To
CertainTeed sells two ridge vent products you’re likely to have on your roof: the ShingleVent II and the larger Roll Vent system, plus ridge cap shingles in their Landmark, Presidential Shake, and Highland Slate lines that need to be matched when we lift and reset them. ShingleVent II is the rectangular plastic vent with the external baffle you see on most Summerlin homes built after the mid-2000s. Roll Vent is a flexible mat you unroll along the ridge, and if that’s what you have, most replacements convert it to ShingleVent II because the shingles on your roof need a stiffer base at the ridge than the old roll mat ever provided.
To identify your model, look at the underside of the vent from the attic: ShingleVent II has a 4-foot rigid panel with an internal baffle, and Roll Vent shows as a matte black fiber mesh. Measure the width of the ridge cap shingles, not the ridge itself, because CertainTeed ridge caps in different lines sit slightly different. On the OEM-versus-aftermarket question, we’ll say this plainly: no one makes a ridge vent worth installing that costs less than CertainTeed’s because the price difference on a roll is small and the shingle-side fit matters more than saving $30. We’re an independent roofing contractor. We’re not affiliated with CertainTeed; we install their product because it works, and we also install GAF and Owens Corning vents when the roof calls for it.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Signs Your CertainTeed Ridge Vent Installation Is Failing
- Attic temperatures climbing into the 140s by mid-June. When the vent’s baffles are crushed or clogged with desert dust and palm debris, hot air has nowhere to go and it presses back down through the house. That’s the front door of a failed vent installation, even when the panels still look fine from the rooftop.
- Shingles curling or lifting along the top ridge. A vent that stops venting also stops letting the ridge cap breathe underneath it. Shingle edges flex up, then the adhesive strip lets go, and once the caps lift, the wind doesn’t need much more to peel them.
- Daylight visible through the ridge line from inside the attic. That usually means the old nails backed out in wind or the vent panels curled at the ends, leaving a gap. In Summerlin, our 40-to-50 mph spring gusts work on those end fasteners first.
- Water stains on the ridge beam or the attic deck nearest the peak. When fasteners lift, the vent no longer laps correctly over the ridge cap, so wind-driven rain finds the seam. Look at the framing just under the peak, not the ceiling below, because the stain shows up high in the attic before it gets to your drywall.
- Loose panels you can move with a finger from inside the attic. Give one panel a gentle tug from underneath. If it lifts or slides, the nails missed the sheathing or backed out. That’s a vent that needs resetting before it takes the shingles with it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Summerlin homes, most CertainTeed ridge vent replacements come in between $550 and $1,100 installed. That range reflects three things: the linear feet of ridge you’re venting, how high the pitch runs, and whether the ridge cap shingles have to be reset or replaced. A 30-foot ridge on a walkable pitch sits at the low end. A 60-foot ridge on a steep-terraced Summerlin home on the west side, with cap shingles that must be replaced, sits at the high end. What’s included is removal of the old vent, inspection of the sheathing for soft spots and nail pops, new CertainTeed-compatible vent panels, reset or replacement ridge cap shingles, and re-fastening with the nailing pattern the vent maker calls for, which is the part that earns the wind rating, not the wrapper on the box. We use a written line-item quote, so you’ll see parts and labor split out, and every roofing job carries our 90-Day Done Right Promise in writing.
DIY or Call Us?
There’s a real split here, and we’ll tell you honestly which side you’re on. If you own a one-story Summerlin house and the ridge is walkable, you can safely get in the attic, look for daylight, feel the panels, and take photos. That information helps us quote accurately, and it’s free to gather. Where DIY goes wrong is at the top: ridge vent work happens on the highest point of the roof at the steepest wind exposure, and a lifted panel takes the cap shingles with it. If the ridge cap has already lifted, if there’s daylight through the plates, or if you see soft sheathing from the attic, stop. The panels need to come off and the sheathing needs to be checked, and that’s a two-person job on a roof. Call (844) 951-4545 and we’ll come out for a free estimate.
FAQs
Twelve to twenty years is realistic on a Summerlin roof. UV exposure is the main variable. Summerlin’s intense summer sun bakes the plastic baffle edges long before you notice anything from the ground, which is why we check the vent panels from the attic during any roof inspection past the ten-year mark. Call (844) 951-4545 for a free look.
Sometimes, yes. If the panels are intact and only lifted at the ends from backed-out nails, resetting with the correct fasteners and resealing the laps is a fair repair, often in the $200-to-$400 range on a Summerlin home. If the baffle structure is crushed or the panels have UV-cracked, replacement is the honest answer. Call (844) 951-4545 and we’ll look before we quote the bigger job.
A single-ridge Summerlin installation typically runs four to six hours, weather permitting. We schedule it as a planned job, not an emergency, so you’ll get a firm day and a window rather than a vague promise. Call (844) 951-4545 to get on the schedule.
We order the ShingleVent II panels or Roll Vent conversion through our roofing supply chain when the job is scheduled, matched to your roof’s ridge length and cap shingle line. Nothing sits on a truck waiting for you; the part is brought to your job. Call (844) 951-4545 with your address and we’ll measure the ridge and give you a firm quote.
Written by the team at Shepherd & Sons Roofing Summerlin, serving Summerlin and nearby areas.
If you’ve got a CertainTeed ridge vent that’s failing, or you’re not sure what’s up there, give us a call at (844) 951-4545 and ask for a free estimate. Bill and his crew will come out, look at the ridge and the attic, show you what they find, and put the number in writing before anyone touches the roof. No trip charge inside our own county, and we’ll take a look at any written estimate you’ve already got for a free second opinion.