Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Flashing Replacement: The Summerlin Owner’s Guide
We replace CertainTeed-compatible roof flashing throughout Summerlin, and most residential flashing jobs run $285 to $740 installed depending on the type and how much surrounding roofing has to come up. We can often get a repair crew out the same week, not the same day, because we don’t promise a schedule we can’t keep. Here’s how Summerlin owners usually find out the part failed: a brown stain creeps across a ceiling after a monsoon, or a roofer working on a totally separate job points up at the chimney and says, “That flashing is cooked.” Sometimes you spot it yourself, looking at the curl of metal where the roof meets the wall, backlit by a sunset that brings out every gap.
That’s the moment this page is for. You know the part. You want it matched, priced honestly, and put in right.
Which CertainTeed Models This Applies To
Flashing isn’t tied to a CertainTeed shingle model the way a starter strip or ridge vent is. It’s the metal edge and seal system that moves water away from the roof plane at walls, chimneys, valleys, skylights, and vents, and it has to play nice with whatever CertainTeed line is on your roof. In Summerlin we most often see Landmark, Landmark Pro, and Presidential Shake on the decks here, and the flashing outfit matters most where a metal edge meets a thick, high-profile shingle like Presidential. The lap has to be sized to the shingle’s thickness or the next rain shadows under it.
To identify what you have, look at a loose shingle tab and check the backstamp for the model name, or read the wrapper on any leftover attic bundle. You can also measure an exposed shingle field and note the wind-resistance stamp, since CertainTeed stamps its product lines directly on the shingle. On the flashing side, measure the height and width of the existing metal and copy that spec, not just the color. The OEM-versus-aftermarket decision is genuinely worth making here: CertainTeed-branded flashing and sealants match their published specs and documentation, while a quality aftermarket equivalent in the right gauge and profile does the same job for less.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Signs Your CertainTeed Flashing Replacement Is Failing
Flashing fails quietly. What you notice is usually water somewhere it shouldn’t be. Here’s what we look at, and why each sign shows up.
- Brown ceiling stains after a hard rain. Water is getting behind the top edge of the flashing and running down a rafter before it drops onto the drywall. The stain shows up feet from the actual leak, so don’t trust its location.
- Lifted, curled, or visibly separated metal edges. Heat cycling loosens the seal or the fasteners over years. In Summerlin’s dry air, the metal expands in the summer and contracts at night, and that motion eventually opens a gap.
- Failed or brittle sealant along the lap. Sealant has a shorter clock than the metal itself. Here it’s the sun, not the moisture, that drives it: UV bakes the caulk line hard and it cures into a crumbly strip that no longer flexes.
- Rust streaks or pitting on the visible metal. Ferrous flashing near a coastal-grade salt bath or a metal roof contact point corrodes faster. Once the finish is gone, the metal is on borrowed time.
- Daylight visible in the attic at a wall or chimney penetration. You shouldn’t see light where the roof meets a vertical surface. If you do, the flashing has pulled away or was never lapped correctly, and wind-driven rain is already finding it.
You don’t need to fix any of those symptoms yourself. You do need to know which one you’re looking at when you call, because it changes the scope.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what flashing replacement typically runs in Summerlin, installed, with the parts and labor broken out so you know where your money goes.
| Job Type | Installed Range | What It Covers |
|---|---|---|
| Small step or sidewall flashing section | $285 – $420 | Metal, fasteners, sealant, labor, cleanup |
| Chimney or skylight flashing (single unit) | $420 – $740 | New metal, ice-and-water underlayment, counter-flashing, sealant, labor |
| Full run along a wall or around a vent | $550 – $1,100 | Metal, membrane, sealant, partial shingle lift and reset |
What drives the range: how much shingle has to come up to reach the flashing, how high or steep the section is, and whether the area underneath needs new underlayment because the old membrane is shot. You get an exact written number before anyone touches the roof, and the written 90-Day Done Right Promise on every job. We don’t speculate about the price at the door.
DIY or Call Us?
There’s a real split here. Inspecting flashing from the ground with binoculars, checking your attic for light at a penetration, and measuring the existing metal are all things you can safely do yourself. Replacing it isn’t.
This is ladder-and-height work, and it’s work on old shingles that crack more easily than most people expect. Getting the lap wrong, sealing a joint over a wet deck, or prying up shingle you can’t re-seat means you’ve traded a leak for a bigger one. That’s the part where DIY goes sideways. We’d rather you call and have Bill and the crew handle it safely than take that risk. Call (844) 951-4545 if you’re not sure which camp you’re in. We’ll give you a straight answer whether it needs us or not.
FAQs
Quality metal flashing can last 20 to 30 years, but the sealant and fasteners around it usually fail well before that, often in 8 to 15 years in our climate, so plan on checking sealing points long before the metal gives out. Call (844) 951-4545 for a free look if yours is original.
Sometimes, yes. If the metal itself is sound and only the sealant has failed, a reseal can buy you years. If the metal is rusted, loose, or the lap is wrong, patching just delays the next leak, and we’ll tell you which you’re looking at.
A single small section is usually a half day or less, and a chimney or skylight unit typically runs a full day once we’re on site. Bigger runs along a wall can add time. We’ll give you a real time window when we quote the job.
We specify the replacement flashing to match your CertainTeed shingle profile and color where it’s visible, and we pull it from suppliers we’ve used for years. We don’t carry flashing on a truck, so we order it to size for your roof, not the other way around.
We also install flashing behind GAF and Owens Corning roofs, so if your summerlin neighbor’s CertainTeed roof or a mixed-material detail is in the mix, it’s familiar work. Summerlin roofs get hit with hard summer UV and sudden monsoon rain, which is exactly the combination that ages a flashing lap faster than the calendar suggests.
If you’re staring at a stain or a lifted edge, don’t wait for the next storm to confirm it. Call (844) 951-4545 for a free estimate. We’ll be there when we say we will, show you the photos before we talk money, and put the price in writing.
Written by the team at Shepherd & Sons Roofing Summerlin, serving Summerlin and nearby areas.