Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across North Las Vegas
Metal roofing in North Las Vegas is a different animal than it is in most American cities, because whether your panels ever make it onto your roof depends as much on an architectural review board as it does on the weather. In the northern master-planned communities, a standing seam panel has to clear HOA design review on color, profile, and reflectivity before anyone orders material. We know that process cold. Call (844) 951-4545 and we’ll walk you through it before you spend a dollar.
We answer the phone with a live person, day or night. No call center, no voicemail tree. That matters when your roof is scheduled for tear-off and you need a straight answer about the approval timeline.
Why You’ll Want a Local Metal Roofer in North Las Vegas
North Las Vegas splits into two roofing markets along the I-15 corridor. The older postwar core around 89030 and 89032 is still working on its original low-slope and gravel-ballast roofs, patching and coating year after year. The boom zones out at 89084, 89085, and 89086 – Aliante, Tule Springs, the far north edge near the 215 beltway – are full of 2000s and 2010s stucco homes under concrete tile and shingle now hitting their first replacement cycle. A roofer here has to do two different jobs well. We do.
That second job is where metal comes in, and where the architectural review path matters. A contractor who doesn’t know the submittal process will tear off your old roof, then find out the panel color you picked was rejected two weeks ago. We’re not going to be that contractor. We show you the deck photos before we talk money, and we don’t start a tear-off until approval is in hand.
The metal roofing work we do in North Las Vegas is backed by the written 90-Day Done Right Promise, and our technicians have up to 30 years of experience. We install products from GAF, CertainTeed, and Boral, and we know which profile lines clear North Las Vegas design boards and which don’t.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in North Las Vegas
We handle six metal roofing lines in North Las Vegas – those below are the three that come up most on homes here, plus aluminum and steel roofing, metal shingle, and corrugated work.
Standing Seam Metal Roof in North Las Vegas
Standing seam is the metal roof most North Las Vegas homeowners ask about, and it’s also the one most likely to trigger a design-review submittal. The raised seams hide the fasteners, the profiles span from roughly 1″ to 2″, and the panel lengths run long enough that a 2000s-era Aliante or Tule Springs home can be roofed with few or no horizontal seams. We spec panel fastening for the local wind exposure – monsoon downbursts lift panel edges when the fastening pattern wasn’t designed for them.

Metal Roof Repair in North Las Vegas
Most metal roof repair calls in North Las Vegas trace back to fasteners and flashing, not the panels themselves. Blowing desert dust collects in the panel pans and behind the ridge caps, and when it hardens it traps moisture and grit against the metal and the fasteners. Left alone, that’s where rust starts. We clean out the pans, replace failing fasteners, and reset flashing at the roof-to-wall transitions.

Metal Roof Coating in North Las Vegas
On the older low-slope homes around 89030 and 89032, a reflective metal roof coating is often the right answer where a full metal retrofit doesn’t make sense. The 100°F-plus summers bake the coating and the substrate underneath, so the coating job earns its keep only when the surface prep and primer are done properly. We’ll tell you straight if a coating is worth it on your roof, and when patching another season is the smarter call.

Aluminum & Steel Roofing in North Las Vegas
Aluminum and steel are the two metals that hold up in the desert, and each has a job. Aluminum won’t rust in the dust-and-grit conditions that sit in the panel pans on north-side homes, and it handles the UV load well. Steel is stiffer, cheaper per square on most jobs, and takes a painted finish that holds color. We spec the metal to the roof, not to what we happened to have a deal on.
Trusted Brands We Service in North Las Vegas
We install metal roofing products from GAF, CertainTeed, Boral, and Tamko, and we don’t stock inventory locally. That matters in North Las Vegas: your material ships to the job after approval lands and after we’ve measured the roof, so you’re not paying for panels that sat in a yard through a summer. We work with the manufacturers on lead times, confirm finish availability before the submittal goes in, and keep the schedule honest while the material is in transit.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in North Las Vegas Homes
- HOA submittal rejected or stalled over panel color or profile. In the master-planned north-side communities around Aliante and Tule Springs, the board needs the exact panel profile, color, and finish on paper before material can be ordered. A contractor who starts the tear-off before approval lands leaves the roof open while a committee meets.
- Monsoon downbursts lifting panel edges and ridge caps. The summer wind events here are sharp and short. Panels that weren’t fastened and flashed for the local wind exposure come up at the edges and behind the ridge, and the first you know about it is a leak at the wall transition.
- Dust and grit hardening in the panel pans. Blowing desert dust collects behind the ridge caps and in the panel pans and hardens into a water-holding crust. It traps moisture against the metal and the fasteners, and that’s where corrosion starts on a North Las Vegas roof.
- Failing flashing at roof-to-wall transitions on the older low-slope homes. The stucco homes around 89030 and 89032 sit on caliche-heavy, expansive soils, and the rare winter freeze stresses the flashings. Metal work on these homes is retrofit and repair, not tear-off, and the flashing detailing is the whole job.
Pricing for Metal Roofing in North Las Vegas, NV
Metal roofing in North Las Vegas runs higher than asphalt shingle and lower than you might fear, once you factor in how long it lasts in this heat. Here’s what we typically see in the North Las Vegas market.
- Standing seam metal roof, full replacement: roughly $1,100 – $1,900 per square installed, including the submittal packet, panel, and fastening spec. A typical 2,000 sq ft North Las Vegas home runs in the $22,000 – $38,000 range.
- Metal shingle or corrugated metal roofing: roughly $750 – $1,300 per square installed, depending on profile and finish.
- Metal roof repair (fasteners, flashing, ridge cap): roughly $350 – $1,400 for a targeted repair.
- Metal roof coating on a low-slope roof: roughly $2.50 – $5.50 per square foot, including prep and primer.
What moves the number: panel count, whether the deck needs repair under the old roof, HOA approval timeline, and finish upgrade. Every quote is free, written line item, and we don’t send a trip charge inside our own county. Call (844) 951-4545 to schedule your free estimate.
We Also Serve Cities Near North Las Vegas
The same metal roofing work we do in North Las Vegas covers the surrounding communities: Las Vegas, Sunrise Manor, Winchester, and Whitney. If you’re in one of those and want a metal roof quote, call and we’ll talk through the same architectural-review path your city uses. Our Metal Roofing team handles the broader valley.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in North Las Vegas
Yes – if you’re in a master-planned community like Aliante, Tule Springs, or the far north-side neighborhoods, the HOA architectural review board typically has to approve the panel profile, color, and finish before any material is ordered. The submittal packet typically includes the panel spec sheet, color sample, finish reflectance data, and roof plan showing the layout. We prepare and file it for you.
Plan on several weeks to a couple of months, depending on the board’s meeting calendar. That’s why the submittal runs in parallel with the bid and the measuring, not after. We start the approval clock early so the work doesn’t sit half-finished waiting on a committee. Call (844) 951-4545 and we’ll give you a timeline for your specific community.
Standing seam in a low-reflectance finish and in a color matched to the existing tile and stucco is the profile that clears most boards – muted earth tones, terracotta-adjacent reds, and gray-brown blends. Metal shingle in a profile that matches the existing roof plane also gets through when the panel color matches the community palette. The board is looking for the roof to read as consistent with the neighborhood, not as a bright silver panel on a stucco street.
Different job entirely. Those 1950s – 70s single-story stucco homes have flat or low-slope roofs, often with original built-up or gravel-ballast systems, and metal on them is usually a retrofit or a reflective coating, not a standing seam tear-off. The detail that matters is the flashing at the roof-to-wall transition, where the expansive soils and occasional winter freeze put the most stress. Call (844) 951-4545 for a free estimate – we’ll tell you which approach actually makes sense.
Ask for panel count in squares, the exact panel profile and finish name, the fastening pattern and its wind rating, the flashing and transition details, whether the deck repair is included, whether the HOA submittal is filed by the contractor, and whether the price is fixed or subject to change orders. We show you the deck photos before we talk money, and every quote is written line item with fixed pricing. Call (844) 951-4545 for a free estimate.
Written by the team at Shepherd & Sons Roofing Summerlin.